Copper-saturated chitosan beads (CuSCBs) for Enhanced phosphate removal

This study investigates the sequential use of non-cross-linked chitosan beads (CBs) for copper and phosphate adsorption, emphasizing copper site saturation and selective phosphate binding. Initially, CBs were loaded with copper until saturation was achieved, where all available sites were occupied by copper at an initial concentration of 100 mg/L. These copper-saturated chitosan beads (CuSCBs) were subsequently applied for phosphate adsorption, achieving a maximum adsorption capacity of 85.89 mg/g at pH 5. X-ray Photoelectron Spectroscopy (XPS) analysis revealed a shift in the Cu2O binding energy to lower values upon phosphate adsorption, indicating that phosphate ions interact primarily with the copper ions intercalated on the CBs rather than the chitosan matrix. Additionally, the nitrogen spectra showed no shift, confirming that the amine groups of chitosan do not participate in phosphate binding. The findings suggest a 1:1 interaction ratio between copper and phosphate ions, with each phosphate ion binding to one copper ion, creating a stable and selective adsorption site. The adsorption data fit the Langmuir isotherm and pseudo-second-order kinetic models, suggesting a homogeneous monolayer adsorption mechanism driven by chemisorption, where each copper site on the chitosan surface selectively binds one phosphate ion. Furthermore, the CuSCBs demonstrated minimal copper leaching and retained 90 % of their phosphate adsorption capacity over multiple adsorption–desorption cycles, highlighting their potential as effective and reusable adsorbents for water treatment applications targeting copper and phosphate removal.