A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications

Pandav Kiran Maroti; Rashid Al-Ammari; Atif Iqbal; Lazhar Ben-Brahim; Sanjeevikumar Padmanaban; Haitham Abu-Rub

doi:10.1109/ISIE.2019.8781163

A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications

Pandav Kiran Maroti, Rashid Al-Ammari, Atif Iqbal, Lazhar Ben-Brahim, Sanjeevikumar Padmanaban, Haitham Abu-Rub

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

21 Citations (Scopus)

Abstract

A novel configurations of a non-isolated Modified SEPIC Converter with two Voltage Lift Switched Inductor (MSC_VLSI) modules namely MSC_VLSI-XYL, MSC_VLSI-LYZ and MSC_VLSI-XLZ are presented in the paper. The key features of these configurations are, 1) high voltage conversion ratio, 2) single controlled switch, 3) high-value input inductor to smooth the input current, 4) maximum utilization of input source, 5) continuous input current. With these notable features, proposed configurations are more convenient for high voltage renewable energy applications to boost the low voltage of photovoltaic array/fuel cell. The feasibility of these converter configurations are verified by mathematical analysis and simulation results. MSC_VLSI configurations are simulated for 250 W resistive load and at 50 kHz switching frequency.

Original language	English
Title of host publication	Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	2503-2508
Number of pages	6
ISBN (Electronic)	9781728136660
DOIs	https://doi.org/10.1109/ISIE.2019.8781163
Publication status	Published - Jun 2019
Externally published	Yes
Event	28th IEEE International Symposium on Industrial Electronics, ISIE 2019 - Vancouver, Canada Duration: 12 Jun 2019 → 14 Jun 2019

Publication series

Name	IEEE International Symposium on Industrial Electronics
Volume	2019-June

Conference

Conference	28th IEEE International Symposium on Industrial Electronics, ISIE 2019
Country/Territory	Canada
City	Vancouver
Period	12/06/19 → 14/06/19

Keywords

High Gain DC-DC Converter
Modified SEPIC Converter
Renewable Energy Application
Voltage Lift Switched Inductor

Access to Document

10.1109/ISIE.2019.8781163

Cite this

Maroti, P. K., Al-Ammari, R., Iqbal, A., Ben-Brahim, L., Padmanaban, S., & Abu-Rub, H. (2019). A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. In Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019 (pp. 2503-2508). Article 8781163 (IEEE International Symposium on Industrial Electronics; Vol. 2019-June). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISIE.2019.8781163

Maroti, Pandav Kiran ; Al-Ammari, Rashid ; Iqbal, Atif et al. / A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 2503-2508 (IEEE International Symposium on Industrial Electronics).

@inproceedings{543771c2882b4d678785e89914536a01,

title = "A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications",

abstract = "A novel configurations of a non-isolated Modified SEPIC Converter with two Voltage Lift Switched Inductor (MSCVLSI) modules namely MSCVLSI-XYL, MSCVLSI-LYZ and MSCVLSI-XLZ are presented in the paper. The key features of these configurations are, 1) high voltage conversion ratio, 2) single controlled switch, 3) high-value input inductor to smooth the input current, 4) maximum utilization of input source, 5) continuous input current. With these notable features, proposed configurations are more convenient for high voltage renewable energy applications to boost the low voltage of photovoltaic array/fuel cell. The feasibility of these converter configurations are verified by mathematical analysis and simulation results. MSCVLSI configurations are simulated for 250 W resistive load and at 50 kHz switching frequency.",

keywords = "High Gain DC-DC Converter, Modified SEPIC Converter, Renewable Energy Application, Voltage Lift Switched Inductor",

author = "Maroti, \{Pandav Kiran\} and Rashid Al-Ammari and Atif Iqbal and Lazhar Ben-Brahim and Sanjeevikumar Padmanaban and Haitham Abu-Rub",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 28th IEEE International Symposium on Industrial Electronics, ISIE 2019 ; Conference date: 12-06-2019 Through 14-06-2019",

year = "2019",

month = jun,

doi = "10.1109/ISIE.2019.8781163",

language = "English",

series = "IEEE International Symposium on Industrial Electronics",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "2503--2508",

booktitle = "Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019",

address = "United States",

}

Maroti, PK, Al-Ammari, R, Iqbal, A, Ben-Brahim, L, Padmanaban, S & Abu-Rub, H 2019, A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. in Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019., 8781163, IEEE International Symposium on Industrial Electronics, vol. 2019-June, Institute of Electrical and Electronics Engineers Inc., pp. 2503-2508, 28th IEEE International Symposium on Industrial Electronics, ISIE 2019, Vancouver, Canada, 12/06/19. https://doi.org/10.1109/ISIE.2019.8781163

A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. / Maroti, Pandav Kiran; Al-Ammari, Rashid; Iqbal, Atif et al.
Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019. Institute of Electrical and Electronics Engineers Inc., 2019. p. 2503-2508 8781163 (IEEE International Symposium on Industrial Electronics; Vol. 2019-June).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications

AU - Maroti, Pandav Kiran

AU - Al-Ammari, Rashid

AU - Iqbal, Atif

AU - Ben-Brahim, Lazhar

AU - Padmanaban, Sanjeevikumar

AU - Abu-Rub, Haitham

PY - 2019/6

Y1 - 2019/6

N2 - A novel configurations of a non-isolated Modified SEPIC Converter with two Voltage Lift Switched Inductor (MSCVLSI) modules namely MSCVLSI-XYL, MSCVLSI-LYZ and MSCVLSI-XLZ are presented in the paper. The key features of these configurations are, 1) high voltage conversion ratio, 2) single controlled switch, 3) high-value input inductor to smooth the input current, 4) maximum utilization of input source, 5) continuous input current. With these notable features, proposed configurations are more convenient for high voltage renewable energy applications to boost the low voltage of photovoltaic array/fuel cell. The feasibility of these converter configurations are verified by mathematical analysis and simulation results. MSCVLSI configurations are simulated for 250 W resistive load and at 50 kHz switching frequency.

AB - A novel configurations of a non-isolated Modified SEPIC Converter with two Voltage Lift Switched Inductor (MSCVLSI) modules namely MSCVLSI-XYL, MSCVLSI-LYZ and MSCVLSI-XLZ are presented in the paper. The key features of these configurations are, 1) high voltage conversion ratio, 2) single controlled switch, 3) high-value input inductor to smooth the input current, 4) maximum utilization of input source, 5) continuous input current. With these notable features, proposed configurations are more convenient for high voltage renewable energy applications to boost the low voltage of photovoltaic array/fuel cell. The feasibility of these converter configurations are verified by mathematical analysis and simulation results. MSCVLSI configurations are simulated for 250 W resistive load and at 50 kHz switching frequency.

KW - High Gain DC-DC Converter

KW - Modified SEPIC Converter

KW - Renewable Energy Application

KW - Voltage Lift Switched Inductor

UR - https://www.scopus.com/pages/publications/85070618297

U2 - 10.1109/ISIE.2019.8781163

DO - 10.1109/ISIE.2019.8781163

M3 - Conference contribution

AN - SCOPUS:85070618297

T3 - IEEE International Symposium on Industrial Electronics

SP - 2503

EP - 2508

BT - Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 28th IEEE International Symposium on Industrial Electronics, ISIE 2019

Y2 - 12 June 2019 through 14 June 2019

ER -

Maroti PK, Al-Ammari R, Iqbal A, Ben-Brahim L, Padmanaban S, Abu-Rub H. A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications. In Proceedings - 2019 IEEE 28th International Symposium on Industrial Electronics, ISIE 2019. Institute of Electrical and Electronics Engineers Inc. 2019. p. 2503-2508. 8781163. (IEEE International Symposium on Industrial Electronics). doi: 10.1109/ISIE.2019.8781163

A Novel High Gain Configurations of Modified SEPIC Converter for Renewable Energy Applications

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this